Helping Engineers Solve Complex Geotechnical Issues Faster and More Cost-Effectively Using Geopolymer Injections

Geobear Works with Engineers All Over the World to Solve Complex Issues Including Trenchless Drain Repair, Void Fills, 3D Soil Matrix Projects, Weak or Compromised Soils, and Load-Bearing Capacity 

Solving Complex Challenges Including

Slab Lifting | Void Filling | Ground Stabilization | Pipe and Culvert Stabilization | Foundation Stabilization | Clay Treatment | Trip Hazards | Barrier Cut-off Walls | Trenchless Storm Drain Repairs

Let Geobear be Your Secret Weapon for Complex Projects

Geobear collaborates with engineers globally to support their most challenging projects. We maintain a global staff of experts with backgrounds in civil and geotechnical engineering, customize and review every treatment plan with signoff from our global engineering leaders, and support engineering and construction professionals around the globe to consult and advise on a wealth of different project scenarios. Our team has collaborated on void fill projects, stabilization work, compromised soil remediation, load-bearing capacity improvements, and more.

When your clients require fast, cost-effective solutions to complex problems, you need a partner that can support creative, strategic solutions to help meet their needs. Geobear can send out local experts - usually within two days - to walk the site, conduct an investigation, meet with your team, and assess the full situation. Our global experts collaborate with local teams to design a customized plan that gets reviewed and approved by you and your team. In some cases, geopolymer injection was able to solve problems that no other solution could (check out our case studies to read more on that).

Is Geopolymer Injection Right for My Project?

warehouse floor and forklift

Warehouses and Factories

Slabs and Parking Areas

geopolymer injection project to stabilize ground in tight spaces and complex situations

Utilities and Drainage Projects

Retail and Storefronts

seawall stabilization

Seawall Stabilization

Void Filling with geopolymer

Void Filling

Infrastructure and Roads

geobear successfully supports water and sewer stabilization for public utility

Emergency Projects


Your Options for Treating Ground Issues

One of the most common ways to stabilize a structure in California is piles or piers. When a structure sits on soils that are loose, the building or other structure may start to sink into the ground. A pile or pier connects to the foundation of the affected structure and can restore stability to it.

At Geobear, we use geopolymer injection methods to treat the root cause of the issue. Our technicians inject a special geopolymer solution into affected ground that expands into weak areas and hardens to stabilize the ground. By addressing the soil instability that is causing the problem, you can arrest the settlement itself.

When faced with weak ground, stabilization projects, or void filling, it's best to consult with experts to identify which solution is the most effective for your specific project. Moreover, you'll also determine what is more cost-effective and less likely to affect your construction timelines.

Do You Suspect a Ground Issue?

Geobear has the answers to your questions about foundation issues and subsidence.

The first step if you suspect a foundation issue due to weakened ground is to conduct a site analysis. Our team at Geobear sends out technicians who inspect the affected area, measure any subsidence rates, and define a preliminary treatment plan. Our experts can advise as to the best course of action or, in the rare case that geopolymer injection isn’t the best solution, refer you to someone who can address that property’s specific issue. This makes it easy for you to make a single phone call and get the help you need – no scrolling the internet for hours.

The Geobear Process

We make it easier to tackle subsidence and weak ground issues because you managing construction projects is difficult enough.

Every Geobear project begins with a site visit. During this 45-minute to 1-hour appointment, our experts will walk the property with you, understand the situation, and take detailed measurements of the affected areas.

soil study engineering for subsidence repairs

Creating your treatment plan requires a thorough understanding of the issue. Your consultant will let you know if you need a drain survey, soil study, or other engineering service to diagnose and treat the issues affecting the property.

warehouses and factories

Once all of the assessments and reviews are completed, we have enough information to build a personalized plan to complete your repairs. Your dedicated expert will get to work creating drawings and specifications which are then reviewed internally by multiple geopolymer professionals.

After you’ve reviewed the plan and agreed to move forward, we’ll schedule your work with our team of highly skilled technicians. They’ll mark and drill holes per the site plan, inject geopolymer resin into the holes per specification, and stabilize the ground under your home, sometimes in as little as one day.

Geopolymer Injection for Trenchless Drain Repair

This 30-minute on-demand webinar highlights several case studies where geopolymer injection was used to support trenchless drain repair projects in Southern California. Join Gene McNaughton, President of Geobear US, and John Silva, Director of Operations, for a deeper look at how geopolymer injection can support various challenges, reduce time to project completion, reduce budget, and more. Watch the 30-minute webinar on-demand now.

Structures, Ground Movement, and Geopolymer Stabilization

This one-hour on-demand webinar highlights several case studies and application opportunities for geopolymer injection including void fills, structural stabilization, ground strengthening, drain repair, and foundation stabilization. Learn how geopolymer injection was used across residential, commericial, and industrial applications. Join Andy Lee, VP of Engineering for Geobear Global, for a deeper look at case studies and application examples. Watch the webinar on-demand now.

Modern Ways to Address Void Fill and Soil Densification

This one-hour on-demand webinar features case studies and application examples related to void fills and soil stabilization. Learn more about how geopolymer injection can improve time to completion in even the most critical or complex projects in residential, commericial, and industrial applications. Join Andy Lee, VP of Engineering for Geobear Global, for a deeper look at case studies and application examples. Watch the webinar on-demand now.

Case Studies